Mechanical Engineering
Academic/professional/technical: Research and professional
Sofort lieferbar
There has been considerable interest in the last two decades in the mechanical characterisation of thin film systems and small volumes of material using depth-sensing indentation tests. Usually, the principal goal of such testing is to obtain values for elastic modulus and hardness of the specimen material from experimental readings of indenter load and depth of penetration. But other properties such as residual stress, fracture toughness, and visco-elastic behavior may also be measured. The indentation technique can be used on both brittle and ductile materials where conventional testing may result in premature specimen fracture. The forces involved are usually in the millinewton range and measured with a resolution of a few nanonewtons while the depths of penetration are in the order of nanometres, hence the term "nanoindentation".
List of Symbols.
- Introduction.
- Contact Mechanics.
- Nanoindenation Testing.
- Analysis of Nanoindentation Test Data.
- Factors Affecting Nanoindentation Test Data.
- Simulation of Nanoindentation Test Data.
- Scaling Relationships in Nanoindentation.
- Time-Dependent Nanoindentation.
- Nanoindentation of Thin Films.
- Other Techniques in Nanoindentation.
- Nanoindentation Test Standards.
- Nanoindentation Test Instruments.
- Applications of Nanoindentation Testing.
- Appendix 1 Elastic Indentation Stress Fields.
- Appendix 2 Surface Forces, Adhesion and Friction.
- Appendix 3 Common Indenter Geometries.
- Appendix 4 Non-linear Least Squares Fitting.
- Appendix 5 Properties of Materials.
- Appendix 6 Frequently Asked Questions.
- Appendix 7 Specifications for a Nanoindenter.
This new edition of Nanoindentation includes a dedicated chapter on thin films, new material on dynamic analysis and creep, accounts of recent research, and three new appendices on nonlinear least squares fitting, frequently asked questions, and specifications for a nanoindentation instrument.Nanoindentation Second Edition is intended for those who are entering the field for the first time and to act as a reference for those already conversant with the technique.
Autor: A. C. Fischer-Cripps
Anthony C. Fischer-Cripps, Ph.D. is the Project Leader for Surface Mechanics, Telecommunications & Industrial Physics at Commonwealth Scientific & Industrial Research Organization in Lindfield, Sydney, Australia.
Autor: A. C. Fischer-Cripps
ISBN-13:: 9780387220451
ISBN: 0387220453
Erscheinungsjahr: 01.09.2004
Verlag: Springer-Verlag GmbH
Gewicht: 545g
Seiten: 266
Sprache: Englisch
Auflage 04002, 2. A
Sonstiges: Buch, 243x159x20 mm, 103 Abb.